System Configuration - Mitsubishi Electric MELSEC iQ-F Series Quick Connection Manual

1. PREPARATION
Preparatory Steps Required Products

1.3 System Configuration

This section describes the system configuration in which two inverters (FR-D700) are connected to the FX5 CPU module.
FX5 CPU module
LAN cable
Terminal treatment and wiring (single wire) Terminal treatment and wiring (single wire)
Making a LAN cable Making a LAN cable Refer to Page 10.
Distributor
< BMJ-8-28N >
FR-D700 × 2
<FR-D700 series>
• FR-D720-K
• FR-D740-K
• FR-D720S-K
• FR-D710W-K
For the power supply wiring of FR-D700 series, refer to
Section 2.1 Wiring in the FR-D700 INSTRUCTION MANUAL (Applied) (IB(NA)-0600366
For the power supply wiring of the FX5 CPU module, refer to
Section 6.4 Power Supply Wiring in the MELSEC iQ-F FX5U User's Manual (Hardware) (JY997D55301)
Section 6.4 Power Supply Wiring in the MELSEC iQ-F FX5UC User's Manual (Hardware)
System Configuration
Refer to Page 9. P.9 .
P.10 .
Connecting a
Wiring
Terminating Resistor
Personal computer
Terminal
block
BMJ-8-28N
(There is no internal connection of
pins 2 and 8.)
(A plug with a terminating resistor is
not used.)
To be installed in
advance.
Terminating resistor
100 , 1/2 W
ENG).
and
(JY997D61401).
1
2
3
4
5
6
7