Avaya IX Collaboration Unit CU360 Installing And Administering page 110

Advance administration
Name
OTA Update Enable
Controlling Avaya IX
About this task
You can use AT commands to control the functions of Avaya IX
interface.
™
Avaya IX CU360 can receive AT commands from:
• The device network connection to the controller's IP address through the 55003 port.
• The device USB connection to the controller's serial port through a standard RS232 cable.
This configuration is available only if your administrator enables the advanced settings for users.
Procedure
1. Do one of the following:
• On the endpoint main menu, click Configure.
• On the web interface, click Administrator Settings.
2. On the endpoint, click Advanced.
The default PIN for Advanced settings on the endpoint is 1234.
If your administrator configured a PIN to gain access to the advanced settings on the
endpoint, Avaya IX
™
IX CU360 displays the Advanced window.
3. Click Utilities > Remote Access > AT Commands.
4. Click one of the following in the AT Commands Management field.
• No: Disables the remote access to Avaya IX
TCP, SSH and RS232 serial port.
• IP only: Restricts the remote access to Avaya IX
the TCP connection.
5. Configure the following fields:
IP
Enable All Addresses
Address
Subnet Mask
April 2020
Description
The option to enable or disable remote access to the Over the Air
upgrade information on the public internet, and to alert users that a new
software version is available to upgrade Avaya IX
™
CU360 with AT commands
™
CU360 prompts you to enter the PIN. After you enter the PIN, Avaya
SSH
Enabled
User Name
Password
Installing and Administering Avaya IX Collaboration Unit CU360
Comments on this document? infodev@avaya.com
™
™
CU360 on the endpoint and web
™
CU360 using AT commands through the
™
CU360 using AT commands to only
RS232 Serial Port
Always Initialized
Baud Rate
—
CU360.
110