Glan Parameters Field Descriptions - Avaya IX Collaboration Unit CU360 Installing And Administering

Advance administration

GLAN Parameters field descriptions

Name
MTU
Speed\Duplex Mode
Speed
Duplex Mode
April 2020
Description
The maximum size of data packets sent around the network.
The default MTU size is 1360.
If you transmit data packet of a larger MTU size, the network drops or
fragments the packet. To avoid packet loss or fragmentation, all network
components must use the same MTU size.
For IPv4 address, set the MTU size in the range of 576 through 1500.
For IPv6 address, set the MTU size in the range of 1280 through 1500.
The option to select the speed of the network port that defines the data
transmission speed in the network.
The options are:
• Automatic: Avaya IX
automatically. This is the default option.
• Auto - up to 100/Full: Semi-automatic mode with a specified maximum
speed and data transmission.
• Auto - up to 100/Half: Semi-automatic mode with a specified maximum
speed and data transmission.
• Auto - up to 10/Full: Semi-automatic mode with a specified maximum
speed and data transmission.
• Auto - up to 10/Half: Semi-automatic mode with a specified maximum
speed and data transmission.
• Manual: Configure the speed and duplex mode manually for the
network.
The speed of the network port.
The options are:
• 10 Mbps
• 100 Mbps
The data transmission mode that is defined for the network router or
switch.
The options are:
• Half: The half duplex mode provides communication in both directions,
but only in one direction at a time.
• Full: The full duplex mode provides communication in both directions
simultaneously.
Installing and Administering Avaya IX Collaboration Unit CU360
Comments on this document? infodev@avaya.com
™
CU360 selects the speed and duplex mode
90