Avaya IX Collaboration Unit CU360 Installing And Administering page 111

6. On the web interface, click Save.
Related links
Enabling the Avaya IX CU360 advanced settings
AT Commands field descriptions
AT Commands section
Name
AT Commands Management The option to enable or disable remote access to Avaya IX
IP section
Name
Enable All Addresses
Address
Subnet Mask
SSH section
Name
Enabled
April 2020
Description
AT commands through the TCP, SSH and RS232 serial ports.
The options are:
• No: Disables the remote access to Avaya IX
commands through the TCP, SSH and RS232 serial port.
• IP only: Restricts the remote access to Avaya IX
commands to only the TCP connection.
Description
The option to allow remote access to Avaya IX
commands from all IP addresses or restrict the AT commands access to a
specific range of IP addresses.
The options are:
• Yes: Enables the remote access to Avaya IX
commands from any IP address.
• No: Restricts the remote access to Avaya IX
commands to a specific range of IP addresses. You can define the
range of IP addresses in Address and Subnet Mask.
The IP addresses of the devices that you allow to send AT command.
You can enter a value in this field only if you configure Enable All
Addresses to No.
The range of addresses that you allow to send AT command.
You can enter a value in this field only if you configure Enable All
Addresses to No.
Description
The option to enable the AT commands API through SSH.
Installing and Administering Avaya IX Collaboration Unit CU360
Comments on this document? infodev@avaya.com
AT Commands field descriptions
on page 37
™
CU360 using
™
CU360 using AT
™
CU360 using AT
™
CU360 using AT
™
CU360 using AT
™
CU360 using AT
Table continues...
111