Avaya IX Collaboration Unit CU360 Installing And Administering page 48

Initial administration
Important:
Do not connect both Ethernet and WiFi networks simultaneously in Avaya IX
Before you begin
Ensure that the Ethernet cable is not connected to Avaya IX
Procedure
1. Click Configure > Networks.
2. Click Wi-Fi.
™
Avaya IX
3. Enable WiFi.
4. Select and configure your WiFi network.
If you do not need to install security certificates for your WiFi network, set CA Certificate
to Do Not Validate.
Configuring Bluetooth connectivity in Avaya IX
Before you begin
Enable the Avaya IX
Procedure
1. Select Configure.
™
Avaya IX
2. Select Advanced.
The default PIN is 1234.
If your administrator configured a PIN to gain access to the advanced settings, Avaya IX
CU360 prompts you to the enter PIN. After you enter the PIN, Avaya IX
the Advanced window.
3. Click System.
™
Avaya IX
4. Select Security.
™
Avaya IX
5. Select Settings.
™
Avaya IX
6. Click Bluetooth.
April 2020
CU360 displays the Wi-Fi window.
™
CU360 advanced settings.
CU360 displays the Configure window.
CU360 displays the System window.
CU360 displays the Security window.
CU360 displays the Settings window.
Installing and Administering Avaya IX Collaboration Unit CU360
Comments on this document? infodev@avaya.com
™
™
CU360.
™
CU360
™
CU360 displays
CU360.
™
48