Cu360 - Avaya IX Collaboration Unit CU360 Installing And Administering

Advance administration
Name
User Name
Password
RS232 Serial Port section
Name
Always Initialized
Baud Rate
Configuring telnet in Avaya IX
About this task
With telnet, you can control Avaya IX
This configuration is available only if your administrator enables the advanced settings for users.
Procedure
1. Do one of the following:
• On the endpoint main menu, click Configure.
• On the web interface, click Administrator Settings.
2. On the endpoint, click Advanced.
The default PIN for Advanced settings on the endpoint is 1234.
If your administrator configured a PIN to gain access to the advanced settings on the
endpoint, Avaya IX
™
IX CU360 displays the Advanced window.
3. Click Utilities > Remote Access > Telnet.
4. Configure the following fields:
• Telnet Management
• Enable All Addresses
April 2020
Description
The user name for the SSH management.
The default user name is Admin.
The password for the SSH management.
The default password is 1234.
Description
The option to accept an AT initialization command before accepting other
commands, when required by the API.
Use this option when the controlling device cannot detect whether Avaya
™
IX CU360 restarted.
The baud rate of the devices that you allow to remotely gain access to
™
Avaya IX

CU360.

The baud rate must be the same as the baud rate of the controlling
device.
™
CU360 by using CLI commands.
™
CU360 prompts you to enter the PIN. After you enter the PIN, Avaya
Installing and Administering Avaya IX Collaboration Unit CU360
Comments on this document? infodev@avaya.com
™
CU360
112