Cu360 - Avaya IX Collaboration Unit CU360 Installing And Administering

Name
Authentication Password
Use Server 1
Use Server 2 (Optional)
Use Server 3 (Optional)
Server 1 DNS Name
Server 2 DNS Name
(Optional)
Server 3 DNS Name
(Optional)
Server Model
Configuring TLS in Avaya IX
About this task
With TLS, network devices can communicate securely by using certificates. TLS provides device
authentication and communications encryption.
This configuration is available only if your administrator enables the advanced settings for users.
Procedure
1. Do one of the following:
• On the endpoint main menu, click Configure.
• On the web interface, click Administrator Settings.
2. On the endpoint, click Advanced.
The default PIN for Advanced settings on the endpoint is 1234.
If your administrator configured a PIN to gain access to the advanced settings on the
endpoint, Avaya IX
™
IX CU360 displays the Advanced window.
3. Click Protocols > SIP > Advanced.
4. Configure the following fields:
• Transport Outbound Call
• Use TLS
• Verify Certificate
April 2020
Description
The password for authenticating Avaya IX
The SIP servers to which Avaya IX
For redundant SIP deployments, you can enter information for maximum
three SIP servers.
™
• Avaya IX CU360 uses the Server 1 as the default SIP server.
• If the Server 1 fails, Avaya IX
The DNS name or IP address of each SIP server.
The model of the SIP server for the best interaction.
™
™
CU360 prompts you to enter the PIN. After you enter the PIN, Avaya
Installing and Administering Avaya IX Collaboration Unit CU360
Comments on this document? infodev@avaya.com
Configuring TLS in Avaya IX
™
™
CU360 registers for calls.
™
CU360 uses the Server 2 and Server 3.

CU360

™
CU360
CU360 with SIP servers.
97