Avaya IX Collaboration Unit CU360 Installing And Administering page 53

Procedure
1. Do one of the following:
• On the endpoint, click Configure > Advanced > Utilities > PIN Protect Settings.
• On the web interface, click Administrator Settings > Utilities > Pin Code.
2. Do one of the following: From the drop-down options, select Yes to enable PIN protection
for one or both of the following settings:
• On the endpoint, configure the following fields:
- Advanced Settings
- Basic Settings
• On the web interface, under PIN Protect Settings, configure the following fields:
- Administrator
- Basic
™
Avaya IX
3. Do the following to set PIN:
a. Enter the current PIN. The default PIN is 1234.
b. Enter the new PIN.
4. On the web interface, click Save.
Preventing calls to Avaya IX
About this task
Prevent calls from invalid numbers to enhance security, especially if users can gain access to
™
Avaya IX CU360 from public networks. Preventing such calls blocks hackers from attacking your
SIP and H.323–based networks.
You can prevent calls from invalid numbers separately for each network interface. If Avaya IX
CU360 is not registered to:
• A SIP server, incoming SIP-based calls using IP addresses are rejected. Calls must be
established using:
- The user@host syntax.
- The host##user syntax where host is the Avaya IX
user name.
• A gatekeeper, incoming H323–based calls using IP addresses are rejected. Calls must be
established using:
- The alias@host syntax.
- The host##alias syntax where host is the Avaya IX
H.323 alias.
April 2020
CU360 displays a window to enter PIN.
™
Installing and Administering Avaya IX Collaboration Unit CU360
Comments on this document? infodev@avaya.com
CU360 from invalid numbers
™
CU360 IP address and user is the SIP
™
CU360 IP address and alias is the
Avaya IX CU360 security
™
53