Daikin intelligent touch Controller DCS601C51 Operation Manual page 84

System Settings Menu Operation
Screen 1 Heating Mode Optimization
1 3
Screen 2 Confirmation
83
2
4
3
4
4 4
5
5
6
6
7 8
Operation of Heating Mode Optimization
Before performing Heating Mode Optimization,
thoroughly read the Heating Mode Optimization
Settings section on page 45, and perform the
following procedures:
1.
See page 63 and select Heating Mode Optimization.
2.
Screen 1 Heating Mode Optimization, which is shown
on the left, appears.
This screen shows current registration status
of Heating Mode Optimization.
3.
Touch an indoor unit to be added as shown
by q, and press the button w to add.
To deactivate this control, select an indoor
unit at e, and press the button r.
4.
Lastly, when all indoor units are registered,
press the [OK] button t.
(To cancel, press the [Cancel] button y.)
Screen 2 Confirmation Display appears.
When there is no problem in setting change,
press the [Yes] button u. This menu is
ended, and System Settings Menu appears.
To continue the change, press the [No]
button i. The screen 1 appears.