Daikin intelligent touch Controller DCS601C51 Operation Manual page 60

System Settings
Menu Item
Simple
Interlock
59
In the following section, utilization of the simple interlock control function is described
while giving some examples.
Referring to the figure below, the setting examples of the simple interlock control
program are provided.
[Example 1 of interlock control]
When any of the air conditioning units on the second floor (1-00, 1-01) start
operating, HRV (1-02) will be started. When all of the air conditioning units (1-00, 1-
01) on the second floor stop, HRV (1-02) will be stopped.
[Example 2 of interlock control]
When the key of the first floor (2-03)* is locked, the air conditioning units (2-00 to 2-
02) will be stopped and start/stop operations of the hand-held remote controller will
be prohibited.
* The mark shown in the figure below represents a key. In this example, locking
the key to the Di unit allows a closing (ON) connection point to be connected.
¡Before the interlock control is
activated
1-00 1-01
2-00 2-01
Zone Name : Zone 1F
While the interlock control is
¡
active
1-00 1-01
2-00 2-01
Zone Name : Zone 1F
Settings for performing the control operations described above
Interlock
Interlock
Program
input point Input Condition
Number
Program 1
1-00 Anyone or more
(two interlock
1-01 of the groups ON
operations)
Program 2
(one interlock
2-03 All ON
operations)
Description
1-02
(HRV)
2-03
2-02
(open)
Air conditioning unit (1-00) in operation
Di unit (2-03) locked
1-02
(HRV)
2-03
2-02
(closed)
Interlock Output 1
Control Target Control Item Input Condition
1-02 Start operation
• Stop
• hand-held
Zone 1F remote controller No detection
• Prohibition of
start/stop
Interlock Output 2
Control Target Control Item
All OFF 1-02 Stop
– –
Operation
(Reference)
See pages
92 94
to