Daikin intelligent touch Controller DCS601C51 Operation Manual page 26

Permit / Inhibit setting of Ventilation Remote Control Operations
Screen 1 Monitoring
Screen 2 Operation
Screen 3 Advanced Settings
25
2
4
7
6
Perform the following procedure to enable or
disable the ventilation remote control
1
operations:
On the monitoring screen, you can select
any of the following display types:
Icon, Detailed Icon, or List.
You may enable or disable the remote
3
control operations in units of zones or
groups.
[Procedure]
1.
On the Monitoring Screen Screen 1,
select a zone or group by pushing the
button q.
2.
To select a zone or group subject to
ventilation volume switching, push the
icon w.
3.
Push [Configure] button e to display
the Set Screen Screen 2.
4.
Push [Advanced Settings] button r to
display the Advanced Settings Screen
Screen 3.
5.
Make a desired setting on the pull-down
menu t.
You can enable or disable the following
setup items for remote control:
Prohibited
Stop Only
Permitted
No change
After making the setting, push [OK]
button y to display Operation Screen 2
again.
To cancel above settings, push
[Cancel] button.
6.
Lastly, push [OK] button u on
Operation Screen.
To cancel above settings, push
[Cancel] button.
∗ Not all models permit the above settings.
[Details of Setting]
5
Item Setting
Prohibited
Start/Stop Stop Only
Permitted
Meaning
The remote control cannot
start or stop operation.
The remote control can stop the
operation of air conditioners in
operation but cannot start air
conditioners not in operation.
The remote control can start
or stop operation.