Daikin intelligent touch Controller DCS601C51 Operation Manual page 23

Changing the Range of Operation Allowed with Remote Control
Screen 1 Monitoring
2
Screen 2 Operation
9
Screen 3 Advanced Settings
8
4
Change the setting of operation with the remote
1
control of air conditioners between Permitted and
Prohibited.
On the Monitoring screen, operation is allowed
with either Icon or List as the display type.
The setting between Permitted and Prohibited
can be changed by zone or by group.
[Procedure]
1.
On Screen 1 Monitoring, select a zone
or a group from button q.
3
2.
Select with w a zone or a group for which
the setting of the range of operation
allowed with remote control is to be reset.
3.
Press the [Configure] button e.
Screen 2 Operation is displayed.
4.
Press the [Advanced Settings] button r.
Screen 3 Advance Settings is displayed.
5.
Then make setting with the pull-down
menus t - u.
There are three settings as shown below:
tStart/Stop
Prohibited
Stop Only
Permitted
No change
yOperation Mode
Permitted or Prohibited
No change
uSetpoint
Permitted or Prohibited
No change
Press the [OK] button i after setting
t - u.
To cancel the setting, press the
[Cancel] button.
Screen 2 Operation is displayed again.
6.
5
Then press the [OK] button o on Screen
2 Operation.
6
To cancel the setting, press the
[Cancel] button.
7
[Details of Setting]
Item Setting
Prohibited
Start/Stop Stop Only
Permitted
Permitted
Operation
Mode
Prohibited
Permitted
Setpoint
Prohibited
Meaning
The remote control cannot
start or stop operation.
The remote control can stop the
operation of air conditioners in
operation but cannot start air
conditioners not in operation.
The remote control can start
or stop operation.
The remote control can
change the operation mode.
The remote control cannot
change the operation mode.
The remote control can change
the temperature setting.
The remote control cannot
change the temperature setting.
22