Daikin intelligent touch Controller DCS601C51 Operation Manual page 19

Switching the Operation Mode
Screen 1 Monitoring
2
Screen 2 Operation
5
Switch the operation mode of the air
conditioner.
1
On the Monitoring screen, operation is
allowed with either Icon or List as the display
type.
The operation mode can be switched by
zone or by group.
Selecting a zone and switching the
operation mode switches the mode of
all air conditioners in the zone.
Selecting a group and switching the
operation mode switches the mode of air
3
conditioners in the group selected.
[Procedure]
1.
On Screen 1 Monitoring, select a zone
or a group from the button q.
2.
Select with w a zone or a group of
which the operation mode is to be
switched.
3.
Press the [Configure] button e.
Screen 2 Operation is displayed.
4.
4
Select the operation mode to be set
from the pull down menu r.
On the menu, operation modes
available for air conditioners in the
zone are displayed if the switching is
to be made by zone. See the
example below.
5.
Press the [OK] button t.
To cancel the setting, press the Cancel
button.
Ex.: For the following zone setting, the
operation modes available are Fan,
Cool, Heat and Auto.
If Changeover option is not available for
any air conditioner in the zone, Fan and
Dependent are the available operation
modes.
Zone name Group name
Canteen
1F North
1F West
Operation modes available
Cool Fan
Cool Heat
Auto Fan
18