The Random Control Training - biodex BALANCE SYSTEM SD Operation & Service Manual

CONTENTS

THE RaNDOM CONTROL TRaINING

This training mode allows the patient to perform neuromuscular control activities in random pat-
terns generated by the display and is ideal for motor control and vestibular training. The size and
speed of the target can be modified for progressions ranging from easy to difficult. While in static
mode the patient can work within their sway envelope to move the cursor and attempt to keep it
within the moving target. In dynamic mode the patient must utilize various hip, knee and ankle
strategies to manipulate the moving platform's cursor to within the random moving target.
Scoring is percentage-based and equals the total time inside the circle/total time in and outside
of the circle. Time counts up or down as set.
Figure 7.6. The Random Control Training screen.
To access The Random Control Training Mode:
1. Position the support handles as per patient protocol.
2. Position the display height and tilt for patient comfort.
3. At the Main Menu, touch <Training>. The Training Menu screen should now be displayed.
4. Touch <Random Control >. The User Setup Information screen should now be displayed. If
this is a new patient and you want to save this training session after its completion, you
must enter the patient's name, height and weight. If you do not need to save the training
session, touch <Next> and skip to step 8.
5. Touch the <Keypad> icon for "Name" and enter the patient's name. Touch <OK> to return
to the User Information screen.
6. Touch the <Keypad> icon for "Age" and enter the patient's age. Touch <OK> to return to
the User Information screen.
7. Touch the <Keypad> icon for "Height" and enter the patient's height. Touch <Next> to
advance to the Random Control Training screen.
— 7-11 — THE TRAINING MODES