Turn Tone On/Off; Adjust Lcd Brightness; Adjust Tone Volume; Select Measure Units, Printer Resolution Or Joystick Emulation - biodex BALANCE SYSTEM SD Operation & Service Manual

CONTENTS

Turn Tone ON/OFF

This setting enables or disables an audible tone which signals test or exercise start, completion
and countdown between trials.
1. At the Configuration screen, simply touch the ON or OFF icon to select the desired setting.

adjust LCD Brightness

This setting brightens or darkens the display screen for all applications.
1. At the Configuration screen, simply touch along the LCD Brightness Bar Scale until the
desired display brightness is achieved. The left end of the scale is darkest, the right end of
the scale is lightest.

adjust Tone Volume

This setting raises or lowers the volume of the audible tone which signals test or exercise start,
completion and countdown between trials.
1. At the Configuration screen, simply touch along the Tone Volume Bar Scale until the desired
level is achieved. The left end of the scale is least loud, the right end of the scale is most loud.

Select Measure units, Printer Resolution or joystick Emulation

All three of these setting are simple toggle choices. Simply touch the desired parameter to view
the choices, then touch the setting you want to select.
• Measurer Units: Metric or US
• Printer Resolution: normal or high
• Joystick Emulation: disabled or enabled
SYSTEM UTILITIES — 11-6 —