Configuration; Set Screen Time Out - biodex BALANCE SYSTEM SD Operation & Service Manual

CONTENTS

CONFIGuRaTION

(See Figure 11.1.)
At the System Utilities screen, touch <Configuration> and then enter 781 in response to the
"Enter Access Code" prompt. Touch <OK>. The Configuration screen should now be displayed.
At this screen users can set values for Screen Time Out, Screen Saver, Date/Time, Fall Risk
Defaults, m-CTSIB Defaults and Change Access ID Code. You can also turn Tone ON/OFF,
adjust LCD brightness or Tone volume, and select Measurement Units, Printer Resolution or
Joystick Emulation. When you have finished making all of your selections and adjustments,
touch <OK> to return to the Main Menu.
Figure 11.1. The Configuration screen.

SET SCREEN TIME OuT

The Screen Time Out setting determines how long the display screen remains ON when the
system is no longer in use following a test/exercise. Once the selected time expires, the system
returns to the Main Menu.
1. At the Configuration Screen, touch <Set Screen Time Out>. The Set Test/Exercise Complete
Screen Time Out screen should now be displayed.
Use the < ▲> or < ▼> arrows to increase or decrease the value displayed in 00:30 second
2.
increments. The Time Out range is from 00:00 to 30:00.
3. Touch <OK> to confirm your changes and return to the Configuration screen. Touch
<Cancel> to return to the Configuration screen without making any changes.
SYSTEM UTILITIES — 11-2 —