CONTENTS
14. When you are finished reviewing the % Weight Bearing Training screen, touch <Print> to
print the screen, or <Save Results> to save the training session (numeric data only).
15. After printing or reviewing the screen, press <Start> to immediately begin another training
session using the same parameters, or press <Back> to return to the Training Setup screen.
NOte: Scoring is the % time spent within the target range.
Create, Save and Recall Custom Protocols
Custom protocols are organized as those for Training and those for Testing. Creating protocols
are the same for either case.
1.
In System Utilities Select <Custom Protocol List >
2.
A Custom Protocol list will appear.
3.
Select <Create Protocol>
— 7-15 —
THE TRAINING MODES