Introduction; Intended Use; Indications For Use; Contraindications - biodex 058-820 Instructions For Use Manual

1. Introduction

Intended Use

The 3D Imaging C-Arm Table 820 is designed for image-guided procedures where stability,
access, and precise, quiet, vibration-free positioning are essential. It features motorized
actuation of height, X-Y tabletop, lateral roll and Trendelenburg motions. Functional design
provides complete access with reduced radiation exposure to clinicians. Patient comfort and
stability are assured by table padding and an adjustable strap.

Indications for Use

With the primary utility as a platform for positioning a patient for imaging during a medical
procedure on a large radiolucent area, the C-Arm Table facilitates the end user, which could be
urologists, brachytherapy specialists, and other clinicians.

Contraindications

The 3D Imaging C-Arm Table 820 should not be used for bariatric patients who weigh more
than 500 lb.

Control Made Easy

The portable hand-held and foot operated controllers ensure quick and safe tabletop
positioning and can be positioned from any point around the table. Both the Hand and Foot
Controllers operate table movements for X-Y tabletop motion, Trendelenburg motion, table
height, and Lateral Roll (tilt). The hand-held controller provides the back to level function.
Both AC and battery power are standard. When operating on battery, the power cord can be
stowed around the retaining clips at the rear end of the table. Battery charging occurs when the
table is plugged into an AC outlet and the power switch is flipped to the ON position. When on
batter power only and not in use, the power switch must be flipped to OFF to avoid draining the
battery of power.
IMPORTANT NOTE: Remove battery if storing the table for a prolonged time.
8