M-Ctsib Default Settings; To Adjust Fall Risk Platform Setting - biodex BALANCE SYSTEM SD Operation & Service Manual

16. TROUBLE-SHOOTING

To adjust Fall Risk Platform Setting:

1. At the Configuration Screen, touch <Fall Risk Defaults>. The Fall Risk Defaults screen
will appear.
2. Touch the Fall Risk Platform Setting you would like to adjust (Initial or Ending).
An adjustment selection screen will appear.
3. Enter the desired platform setting via the key pad displayed.
4. Touch <OK> to return to the Fall Risk Defaults screen.
To adjust Predictive Values:
1. At the Configuration Screen, touch < Fall Risk Defaults>. The Fall Risk Defaults screen
will now be displayed.
2. Touch to highlight the predictive value you wish to adjust.
Use the < ▲> or < ▼> arrows to increase or decrease the value displayed
3.

M-CTSIB DEFauLT SETTINGS

(See Figure 11.3.)
At the m-CTSIB Default Settings screen, users can set which conditions of the CTSIB they want
as defaults for testing as well as the ability to enter in or change the Sway Index Goals. Default
settings can be restored to "factory" defaults by touching <Restore Defaults>.
Figure 11.3. System m-CTSIB Defaults Settings.
SYSTEM UTILITIES — 11-4 —