Page 1
FREESTEP SAS INSTRUCTIONS FOR USE AND ASSEMBLY 950-487 960-126 960-401 960-402 FN: 19-052 2/19...
Page 2
487, 960-126, 960-401 and 960-402. Additional information and resources are available upon request or directly from the Biodex website, www.biodex.com. If the desired information is not found, please feel free to contact a local distributor or Biodex directly at supportservices@biodex.com. Thank you, Biodex Medical Systems, Inc.
Attach Height Adjustment System to Track and Trolley ..........9 FreeStep SAS Operation ....................10 Emergency Procedures ....................12 FreeStep SAS System Operation ..................14 Using the Standard Unweighing Harness ..............14 Support Harness DLX ....................16 Braking Trolley (Optional) .................... 18 ...
Call Biodex Customer Service for assistance. WARNING: The FreeStep SAS System must be thoroughly inspected every time prior to usage with a patient to ensure safe operation. Refer to the Maintenance and Safety Inspection section for details.
The FreeStep SAS System is designed for use in a patient environment. For product specifications, refer to the Table of Contents. Reference Cleaning and Maintenance instructions in Section 6. Biodex Warranty Refer to the warranty card included with the product or contact Biodex Support Services.
Indications for Use The FreeStep SAS is an overhead track and harness system that provides a safe ambulation environment for both therapist and patient. Without the fear of falling, patients can focus more fully on their tasks of gait and balance.
Videos There are also many FreeStep SAS videos located on the Biodex website under Physical Medicine > Products > Supported Ambulation > FreeStep SAS. To play a video, select the triangle (play button) on the right of the screen. These two videos focus on Parkinson’s: 1.
2. Assembly Instructions Attach Height Adjustment System to Track and Trolley 1. In preparation for attaching the Height Adjustment system to the track and trolley, remove the shackle pin (2) from the U-shaped clevis (1) using pliers or an adjustable wrench. Figure.1.3.
NOTE: It is recommended that a zip tie is added to the shackle pin to ensure it does not back out of the clevis. FreeStep SAS Operation Using the Pulley and Rope: 1. Adjust the tension to a level that best supports the patient while participating in ambulatory level and/or therapeutic activities by pulling down to raise the pulley.
Page 11
Figure 1.7. Tug the Rope to Disengage the Rope from the Cam Cleat. NOTE: In theory, the FreeStep pulley system creates a 3:1 advantage of leverage meaning that the patient’s weight will only feel one third as heavy as it actually is. However, in practice, the friction between the rope and the pulleys will add about 10% of the weight back to the required force necessary for hoisting.
2. Take the rope and step away from the track. A hard flip will disengage the rope from the cam cleat. Figure 2.0. Putting Pressure on the Rope. NOTE: These steps are explained in the FreeStep SAS eLearning course.
Page 13
3. Lower the patient into the chair. Figure 2.1. Lowering the Patient into the Chair. If two people are available: 4. One person takes the patient under the arms and lifts the patient until there is slack in the rope. 5.
Standing Harness Application Note: Applying the Biodex Standard Unweighing Harness while the patient is in a standing position is covered in a video that is offered within the Products section of the Biodex Home website: www.biodex/harnesses. Sitting Harness Application...
Page 15
Figure 2.3. Unweighing System Harness Application Videos.
Worn as a vest around the upper torso, the Support Harness DLX provides patients with security and safety from falling when used with the FreeStep SAS or Unweighing System. Versatility includes double shoulder point connections to spreader bar or, a single connection point for low ceiling applications with tall patients (6'3"...
Page 17
Straight Hanger Bar with Quick Disconnect Some systems will ship with a straight hanger bar as illustrated in Figure 2.7 below. Figure 2.7. Straight Hanger Bar with Quick Release The straight hanger bar features a quick disconnect that allows the use of a single point harness when the intention is slight support or safety from falling during activity.
Braking Trolley (Optional) The Braking Trolley is an accessory to the FreeStep SAS. It contains two sets of rollers and a braking mechanism that provides compression for increased friction against a FreeStep overhead rail track. The larger eyelet (between the rollers) is where the patient height adjuster or single line drop hardware is attached.
Page 19
Figure 3.1. Creating a Closed Loop with the Ropeman. If using a dual point attachment, position the ropeman so it is parallel with the spreader bar. Attach the carabiner to the bracket as illustrated in Figure 3.2. Figure 3.2. Ropeman Using a Dual Point Attachment. The mechanism needs to be positioned to the teeth are facing down.
P-600 Lift (Optional) The P-600 simplifies height adjustments when using the Biodex FreeStep SAS for supported ambulation in a therapy setting. Lightweight and portable, this motorized lift attaches to the support harness to provide complete control for the therapist. With a patient load capacity of 600 pounds, this heavy-duty lift is suitable for higher weight transfers.
4. Operating Instructions The following details the steps to be taken to operate the FreeStep SAS system: 1. Determine what harness is to be used: Standard Unweighing Harness • Support Harness DLX • Bariatric Harness • Pediatric Harness • 2. Attach the patient to the FreeStep SAS as follows: Single Point Attachment: a.
5. Maintenance and Cleaning The FreeStep is virtually maintenance free. By following the instructions below at suggested time intervals, or as often as necessary, the system will remain in “like new” condition. 1. As required, hand-wash all components of the harness on a regular basis with a mild detergent solution, such as Parker Laboratories Protex Disinfectant or any one-step disinfectant that does not contain bleach.
6. Specifications Support Harness DLX: Torso Circumference: 28" to 50" (71 to 127 cm) User Capacity: rated for 300 lb (136 kg) Warranty: 60 days, parts Standard Unweighing Harness: Torso Circumference: 24" to 54" (61 to 137 cm) User Capacity: rated for 300 lb (136 kg) Warranty: 60 days, parts Bariatric Harness: Torso Circumference: 52"...