Postural Stability Training; To Access The Postural Stability Mode; The Training Routine - biodex BALANCE SYSTEM SD Operation & Service Manual

7. THE TRAINING ROUTINE

POSTuRaL STaBILITY TRaINING

(See Figure 7.2.)
The Postural Stability Training mode is designed to emphasize specific movement patterns or
strategies by placing markers anywhere on the screen grid. The patient's score is a tally of how
many times the patient can touch targets with the on-screen cursor during any session. Time
counts up or down as set.
Figure 7-2. The Postural Stability Training screen.

To access The Postural Stability Mode:

1. Position the support handles as per patient protocol.
2. Position the display height and tilt for patient comfort.
3. At the Main Menu, touch <Training>. The Training Menu screen should now be displayed.
4. Touch <Postural Stability>. The User Setup Information screen should now be displayed. If
this is a new patient and you want to save this training session after its completion, you
must enter the patient's name, height and weight. If you do not need to save the training
session, touch <Next> and skip to step 8.
5. Touch the <Keypad> icon for "Name" and enter the patient's name. Touch <OK> to return
to the User Information screen.
6. Touch the <Keypad> icon for "Age" and enter the patient's age. Touch <OK> to return to
the User Information screen.
7. Touch the <Keypad> icon for "Height" and enter the patient's height. Touch <Next> to
advance to the Postural Stability Training screen.
8. At the Postural Stability Training screen, touch <Place Target> and then touch the screen
location where you would like a target to be placed. Repeat this process to place up to nine
targets on the screen.
THE TRAINING MODES — 7-2 —