Maze Control Training - biodex BALANCE SYSTEM SD Operation & Service Manual

CONTENTS

MaZE CONTROL TRaINING

(See Figure 7.5.)
This mode allows the patient to follow a reproducible pattern of movement throughout a maze
in both static and dynamic environments. Three skill levels allow the maze to be modified to
create a simple or more difficult environment for the patient to navigate through. Change the
platform from static mode to dynamic mode to facilitate progression. Time counts up or down
as set.
Scoring is percentage-based on the net good hits/total target hits. If the cursor hits the boundary
that hit is subtracted from the total possible amount of good hits.
• Easiest maze has 28 total targets, 14 in each direction
• Moderate has 36 targets, 18 in each direction
• Most difficult has 72 targets, 36 in each direction
In the case of the easiest maze. If the wall is hit 6 times the resulting score will be 22/28 = 78%
Figure 7.5. The Maze Control Training screen.
To access The Maze Control Mode:
1. Position the support handles as per patient protocol.
2. Position the display height and tilt for patient comfort.
3. At the Main Menu, touch <Training>. The Training Menu screen should now be displayed.
4. Touch <Maze Control >. The User Setup Information screen should now be displayed. If
this is a new patient and you want to save this training session after its completion, you
must enter the patient's name, height and weight. If you do not need to save the training
session, touch <Next> and skip to step 8.
THE TRAINING MODES — 7-8 —