biodex BALANCE SYSTEM SD Operation & Service Manual page 29

Table of Contents

Advertisement

CONTENTS
To set initial platform stability, touch the appropriate key and then enter the setting
from the keypad displayed (static, 12 is most stable, 1 is least stable). Touch <OK> to
return to the Maze Control Training Options screen and set the ending platform stability
in the same manner.
To turn tracing ON/OFF, touch <Tracing> to toggle between choices.
11. At the Maze Control Training screen touch the < > or <M> keys to select the desired plat-
form stability if not already selected (static, 12 is most stable, 1 is least stable).
12. Explain the training protocol to the patient and then press <Start> on the display to begin
the training session. The Stability Training grid on the screen charts the patient's stability
performance through the course of the training session (touch the <Magnifying Glass> to
enlarge the screen if desired). The Elapsed Time from the start of the training session is
shown at the top right of the display while the stability level is illustrated by a bar graph in
the upper right corner. A running patient score is also provided in the upper right corner.
Note that the stability level of the foot platform can be changed at any time during the exer-
cise session.
NOte: If you have selected to enlarge the screen by touching the <Magnifying Glass>, you must
return to the normal viewing screen format to make any changes.
13. At any time during the training session, the "tracing" can be erased by pressing <Clear
Tracing>.
14. To stop the training session at any time, press <Stop> on the display. The system will stop
gathering data and the platform will advance to the locked position.
15. When you are finished reviewing the Maze Control Training screen, touch <Print> to print
the screen, or <Save Results> to save the training session (numeric data only).
16. After printing or reviewing the screen, press <Start> to immediately begin another training
session using the same parameters, or press <Back> to return to the Training Setup screen.
THE TRAINING MODES
— 7-10 —

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

950-440950-441950-444

Table of Contents