Multiple Patient Export; Single Patient Delete; Repeat (Recall A Patient For A Test Or Exercise Session); Single Patient Export - biodex BALANCE SYSTEM SD Operation & Service Manual

CONTENTS

Repeat (recall a patient for a test or exercise session)

To repeat any saved test or exercise session, touch <Repeat> on the on-screen report. The system
will return to the appropriate test or training Position Patient screen with the position values for
foot and heel reflecting the selected session. The selected name, age and height of the selected
patient will also be recorded with the new test or training session if you save at completion.
Print Test Results
To print test results for any patient, touch the desired test to generate an on-screen report then
touch <Print> to print the test results.

Single Patient Export

To export the results of any saved test, touch <Export Data>. The data will immediately sent to
the export program.

Single Patient Delete

Although the Balance System SD display can store a significant number of test records, you may
want to decrease the number of stored records from time to time. To delete any full page display
of saved reports, touch <Delete>. Respond <OK> to the delete prompt. The page displayed will be
deleted from the display memory. The delete function only works with pages, you cannot select a
specific test or patient to delete without deleting every test and patient displayed on the screen.

Multiple Patient Export

(See Figure 11.6.)
NOte: Store patient records on a USB memory device. Manage, view and print reports with Patient
Data Collection Software (Biodex part #950-389).
In addition to exporting any single patient record, multiple patient records can be exported.
1. At the Patient Management screen touch <Multiple Export> to export multiple patient
records. The Multiple Patient Data Export screen should now be displayed.
2. Four options are available for multiple export: all (export all patient records); prior-to
(export all patient records prior to selected date); from (delete all patient records after a
selected date); and from-to (export all records between selected dates.) Touch <Options>
until the desired option is displayed.
• For prior-to and from-to, touch the date displayed to advance to the date screen. Touch
the date section to change and use the < > or <M> arrows to adjust.
3. Touch <Export Now> to export the selected patient files.
SYSTEM UTILITIES — 11-8 —