Wiring N Cable; Removing The Plexiglass Cover; Connecting N Cable - Delta 100kW PCS Installation Manual

Wiring N Cable

According to the demand to decide wiring the N cable or not.
1. Prepare the 1/0 600V wire.
2. Remove the nuts securing the plexiglass cover then remove the plexiglass cover.
3. Remove the two-hole terminal on the copper bar and crimp the 1/0 wire into the two-hole
terminal.
4. Connect the two-hole terminal and wire on the copper bar.
Installation Manual
Figure 62. Removing the Plexiglass Cover
Figure 63. Connecting N Cable
58
Wiring Instructions