Forklift Installation; Releasing A Pcs From A Pallet - Delta 100kW PCS Installation Manual

Forklift Installation

CAUTION!
!
T 100
O MOVE THE
915 (36-
AND A CM
CAUTION!
!
T
HE ENCLOSURE MUST BE LIFTED FROM THE BOTTOM
ALL FOUR SIDES WHEN LIFTING
ENCLOSURE FRONT TO BACK AND SIDE TO SIDE DURING LIFTING BECAUSE THE CENTER OF GRAVITY
OF THE ENCLOSURE IS NOT THE CENTER OF THE ENCLOSURE
1. Unpack the 100kW PCS, see "Unpacking the Unit" on page 12.
2. Using the forklift to move the 100kW PCS.
Removing the 100kW PCS from left/right side:
a. Remove the hexagonal nuts and washers securing cabinet to the pallet.
Installation Manual
W PCS,
K USE A FORKLIFT THAT HAS AN APPROPRIATELY RATED LIFT CAPACITY
) .
INCH FORK SPAN
. P
RECAUTIONS MUST BE TAKEN TO AVOID TIPPING OF THE
ON
OF F
STAN
DBY
RUN
FAU LT
DC
DI SC
ON NE
CT
ON
OF F
AC
DI SC
ON NE
CT
ON
OF F
Figure 23. Releasing a PCS from a Pallet
25
. T
HE ENCLOSURE MUST BE SUPPORTED ON
.
Installation