Door; Electrical Installation For Ac Wiring - Delta M70A-262 Operation And Installation Manual

Installation

3.3 Door

In order to ensure the normal long-term operation of the inverter, please follow
the procedures in Section 5.1 to open and close the door.
If the installation space is too narrow for the wiring operation, please remove the
door according to Figure 3-12. After the wiring operation, please install the door
onto the inverter and follow the procedures in Section 5.1.2 to close the door.

3.4 Electrical Installation for AC Wiring

- To avoid shock hazard during cabling, insure any live grid connections are
removed from the inverter.
- Code compliance is the installer's responsibility.
CAUTION : INVERTER AND EQUIPMENT DAMAGE MAY OCCUR !
- Installation for AC terminal must meet the local electrical code.
- Failed to follow the instructions may damage AC cable.
- In order not to damage the components in the inverter, ensure the correct
conductor is connected to the appropriate AC terminal on the inverter.
DANGER : ELECTRICAL HAZARD!!
Figure 3-12: Remove the door
DANGER : ELECTRICAL HAZARD!!
WARNING !
CAUTION: WRONG AC WIRING !
28