I/O Connector (Cnj3); Cnj3 Pin Assignment - Delta 100kW PCS Installation Manual

I/O Connector (CNJ3)

The CNJ3 connector is for digital I/O connection. Take out the green 15-pin connector (CNJ3) from the
accessory kit, and connect eight prepared 1.32 mm
shown in the following figure.
Table 6: CNJ3 Pin Assignment
Item
1: Digital Output 1-1
2: Digital Output 1-2
3: Digital Output 2-1
4: Digital Output 2-2
5: Digital Output 3-1
6: Digital Output 3-2
7: Digital Input 1-1
CNJ3 8: Digital Input 1-2
9: Digital Input 2-1
10: Digital Input 2-2
11: Digital Input 3-1
12: Digital Input 3-2
13: NC
14: REPO_1
15: REPO_2
Installation Manual
2
Pin 7
Pin 1
Figure 45. CNJ3 Pin Assignment
Pin Assignment
45
wires to pin 1~4 and pin 7~10 of this connector as
Notes
Dry Contact 1 (only for internal use)
(Max 24Vdc/10mA)
Dry Contact 2
(Max 24Vdc/10mA)
Dry Contact 3
(Max 24Vdc/10mA)
Wet Contact 1
(24Vdc/20mA)
Wet Contact 2
(24Vdc/20mA)
Wet Contact 3
(24Vdc/20mA)
Not Connect
Remote EPO, Wet Contact for customer.
Wiring Instructions