Delta 100kW PCS Installation Manual page 25

To close the front panel, the interlocking mechanism holding the door and cabinet in place must be first
released.
8. Locate the interlocking mechanism at the base of the door. See the following image.
9. Push the mechanism upwards to unlock it from the rail.
10. Close the front panel. Make sure the front panel closes correctly with the cabinet. The top and
bottom of the panel are flush with the cabinet if the panel is closed correctly.
11. Rotate the door handle to the locked position, and press it in to lock it in place.
Note:
Make sure there is no gap between the front panel and the cabinet. An improperly closed
front panel may damage the locking mechanism on the cabinet, the cabinet or cause injury.
Installation Manual
Figure 18. Release a Mechanism
ON
OF F
STAN DBY
RUN
FAU
LT
DC
DI SC
ON NE
CT
ON
OF F
AC
DI SC
ON NE
CT
ON
OF F
Figure 19. Closing a Front Panel
21
ON ON
OFF OFF
Installation