Door; Electrical Installation For Ac Wiring - Delta M70A 263 Operation And Installation Manual

Installation

3.3 Door

In order to ensure the normal long-term operation of the inverter, please follow
the procedures in Section 5.1 to open and close the door.
After opening the door, please make sure the door is fixed by hexagon driver as
shown below.

3.4 Electrical Installation for AC Wiring

- To avoid shock hazard during cabling, insure any live grid connections are
removed from the inverter.
- Code compliance is the installer's responsibility.
CAUTION : INVERTER AND EQUIPMENT DAMAGE MAY OCCUR !
- Installation for AC terminal must meet the local electrical code.
- Failed to follow the instructions may damage AC cable.
- In order not to damage the components in the inverter, ensure the correct
conductor is connected to the appropriate AC terminal on the inverter.
DANGER : ELECTRICAL HAZARD!!
Figure 3-12: To secure the door by hexagon driver
DANGER : ELECTRICAL HAZARD!!
WARNING !
CAUTION: WRONG AC WIRING !
28