Ac Cable Connection With L1, L2, L3 Terminals; Installing Ac Protective Cover - Delta 100kW PCS Installation Manual

3. Connect AC cables to AC terminals: Loose the hex socket screws of the AC terminals by
Allen wrench, then lead the AC cables with two-hole lugs through the AC cable glands into the
PCS, connect and secure these cables to the relevant "L1", "L2" and "L3" terminals.
Figure 59. AC Cable Connection with L1, L2, L3 Terminals
4. Reinstall and secure the AC protective cover.
Installation Manual
Figure 60. Installing AC Protective Cover
56
Wiring Instructions
OFF
ON
OFF