Acpi Configuration - DFI EC700-AL User Manual

Fanless embedded system
Hide thumbs Also See for EC700-AL:
Table of Contents

Advertisement

Advanced
X

ACPI Configuration

Aptio Setup Utility - Copyright (C) 2020 American Megatrends, Inc.
Advanced
After G3
[Always On]
Version 2.18.1263. Copyright (C) 2020 American Megatrends, Inc.
After G3
This field is to specify what state the system should be in when power is re-applied after a
power failure.
Always On
The system automatically powers on after power failure.
Always Off
The system enter soft-off state after power failure. Power-on signal input is
required to power up the system.
User's Manual | EC700-AL
Advanced
X
Specify what state to go to
EIST
when power is re-applied
Turbo Mode
after a power failure (G3
C-States
state).
Thermal Limit Manual Mode
Thermal Limit Temperature
→←: Select Screen
↑↓: Select Item
Enter: Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F7: Popup Boot Device List
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
EIST
This field is used to enable or disable the Intel SpeedStep
the balance between system's power consumption and performance. After it is enabled in the
BIOS, EIST features can then be enabled via the operating system's power management.
Turbo Mode
Enable or disable turbo mode of the processor. This field will only be displayed when EIST is
enabled.
C-States
Enable or disable CPU Power Management. It allows CPU to enter "C states" when it's idle and
nothing is executing.
Thermal Limit Manual Mode
Enable this field and manually set a temperature to which the CPU TDP adheres — increments
from 80°C to 110°C.
Aptio Setup Utility - Copyright (C) 2020 American Megatrends, Inc.
Advanced
[Enabled]
[Enabled]
[Enabled]
[Disabled]
110
Version 2.18.1263. Copyright (C) 2020 American Megatrends, Inc.
Note:
Some of the fields may not be available when the features are not supported by
the equipped CPU.
Chapter 3
BIOS SETTINGS
Enable/Disable Intel Speed-
Step
→←: Select Screen
↑↓: Select Item
Enter: Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F7: Popup Boot Device List
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
Technology, which helps optimize
®
27

Advertisement

Table of Contents
loading

Table of Contents