Usb Configuration - DFI PR610-C621 User Manual

Advanced SATA Configuration
X X
►PCH sSATA Configuration
InsydeH2O Setup Utility
Advanced
PCH sSATA Configuration
SATA Controller <Enabled>
SATA Speed <Auto>
M.2 slot [Not Installed]
SATA Port <Enabled>
Hot Plug <Disabled>
F1 Help ↑ /↓ Select Item
Esc Exit ←/→ Select Item
SATA Controller
Enable or disable the Serial ATA controller. This following fields will only be displayed when this
field is enabled.
SATA Speed
Select Serial ATA controller(s) speed — Auto, Gen1 (1.5 Gbit/s), Gen2 (3 Gbit/s) or Gen 3 (6
Gbit/s).
SATA Port / Hot Plug
Enable or disable each Serial ATA port and its hot plug function.
User's Manual | PR610-C621
Rev. 5.0
Enable/Disable SATA
Device.
F5/F6 Change Values F9 Setup Defaults
Enter Select SubMenu F10 Save and Exit
X
Advanced
X

USB Configuration

InsydeH2O Setup Utility
Advanced
USB Configuration
Legacy USB Support <Enabled>
XHCI Hand-off <Disabled>
F1 Help ↑ /↓ Select Item
Esc Exit ←/→ Select Item
Legacy USB Support
Enabled Enable Legacy USB support.
Disabled Keep USB devices available only for EFI applications.
XHCI Hand-off
Enable or disable XHCI Hand-off.
Chapter 3
BIOS SETTINGS
Rev. 5.0
U S B k e y b o a r d / m o u s e / s t o r a g e
support under UEFI environ-
ment.
F5/F6 Change Values F9 Setup Defaults
Enter Select SubMenu F10 Save and Exit
X
30