DFI PR610-C621 User Manual page 36

Advanced H2O IPMI Configuration
X X
X BMC Configuration X User Configuration
Configure the BMC's users in this sub-menu. The settings of all the 15 users are listed in the
lower part of the sub-menu.
InsydeH2O Setup Utility
Advanced
User Configuration
User ID [1]
User Status <Enabled>
User Password
Channel [1]
Privilege <Administrator>
Add current setting to list
-----------------------
User Id UserName UserStatus Channel Privilege
1 dfi Enabled 1/2/3 Admin/Admin/Admin
2 Disabled 1/2/3 N/A/N/A/N/A
3 Disabled 1/2/3 N/A/N/A/N/A
4 Disabled 1/2/3 N/A/N/A/N/A
5 Disabled 1/2/3 N/A/N/A/N/A
6 Disabled 1/2/3 N/A/N/A/N/A
7 Disabled 1/2/3 N/A/N/A/N/A
8 Disabled 1/2/3 N/A/N/A/N/A
9 Disabled 1/2/3 N/A/N/A/N/A
10 Disabled 1/2/3 N/A/N/A/N/A
11 Disabled 1/2/3 N/A/N/A/N/A
12 Disabled 1/2/3 N/A/N/A/N/A
13 Disabled 1/2/3 N/A/N/A/N/A
14 Disabled 1/2/3 N/A/N/A/N/A
15 Disabled 1/2/3 N/A/N/A/N/A
F1 Help ↑ /↓ Select Item
Esc Exit ←/→ Select Item
User ID
There are 15 BMC users available per system. Insert a number from 1 to 15 to select which
user ID is to be configured.
User Name
Insert an alias for the currently selected user.
User Status
Enable or disable the currently selected user.
User Password
Set up a password for the currently selected user. To clear any previously configured pass-
word, press Enter and leave the new password empty.
Channel
Select a LAN Channel to configure the privilege of the currently selected user.
Privilege
Select among Reserved, Callback, User, Operator, Administrator, and No Access. The privilege
of a user ID can be set differently in different channels.
Add current setting to list
Save the setting of the current user ID's previlege of the current channel.
User's Manual | PR610-C621
Rev. 5.0
E n a b l e / D i s a b l e I P M I S u p p o r t .
Note: If changing to enable, BMC
detailed information only valid
after rebooting.
F5/F6 Change Values F9 Setup Defaults
Enter Select SubMenu F10 Save and Exit
X
Advanced H2O IPMI Configuration
X X
X SDR List
InsydeH2O Setup Utility
Advanced
SDR List
SDR List Support <Enabled>
ID Sensor Name Value Unit
► 000 CPU Temp 48
℃
► 002 PCH Temp 38
℃
► 003 IO Temp 31
℃
► 004
Riser Temp 30 ℃
► 005 3V BAT 2.997 V
► 006 CPU Status 0 Discrete
► 007 CPU Missing 0 Discrete
► 008 Physical Scrty 0 Discrete
► 009 Voltage Fault 0 Discrete
► 010 Pwr Unit Status 0 Discrete
► 011 BMC Watchdog 0 Discrete
► 012 IPMI Watchdog 0 Discrete
► 013 SMI Timeout 0 Discrete
► 014 System Event Log 0 Discrete
► 015 BMC FW Health 0 Discrete
F1 Help ↑ /↓ Select Item
Esc Exit ←/→ Select Item
SDR List Support
Enable or disable the Sensor Data Record (SDR). All recorded information is listed in the lower
part of the page.
Chapter 3
BIOS SETTINGS
Rev. 5.0
F5/F6 Change Values F9 Setup Defaults
Enter Select SubMenu F10 Save and Exit
X
36