X Rear I/O Ports
Rear I/O Connectors
LAN 1
USB 2 (USB 3.1 Gen 1)
USB 1 (USB 3.1 Gen 1)
MGMT Port (optional)
USB 11 (USB 2.0)
USB 10 (USB 2.0)
User's Manual | PR610-C621
I/O Connectors
PCB
COM 2
COM 1
LAN 2
USB 4 (USB 3.1 Gen 1)
USB 3 (USB 3.1 Gen 1)
VGA (optional)
Graphics Display
Optional VGA (DB15)
A VGA display port of DB15 connector is available when the motherboard is equipped with
SEM2500/SEM2510.
VGA Port
The VGA port is used for connecting a VGA monitor. Connect the monitor's 15-pin D-shell cable
connector to the VGA port. After you plug the monitor's cable connector into the VGA port, gen-
tly tighten the cable screws to hold the connector in place.
BIOS Setting
Configure the display devices in the "Advanced" menu ("Video Configuration" submenu) of the
BIOS. Refer to the chapter 3 for more information.
Chapter 2
HARDWARE INSTALLATION
15