Usb Configuration - DFI CS170-Q370 User Manual

CS170-Q370/C246/H310
► Advanced ► Serial Port Console Redirection
► Console Redirection Settings
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Advanced
COM1
Console Redirection Settings
Terminal Type [VT100+]
Bits per second [115200]
Data Bits [8]
Parity [None]
Stop Bits [1]
Flow Control [None]
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
Terminal Type
Select terminal type: VT100, VT100+, VT-UTF8 or ANSI.
Bits per second
Select serial port transmission speed: 9600, 19200, 38400, 57600 or 115200.
Data Bits
Select data bits: 7 bits or 8 bits.
Parity
Select parity bits: None, Even, Odd, Mark or Space.
Stop Bits
Select stop bits: 1 bit or 2 bits.
Flow Control
Select flow control: None or Hardware RTS/CTS.
Chapter 3 - BIOS Settings
► Advanced

USB Configuration

This section is used to configure the USB settings.
Emulation: ANSI:
Extended ASCII char set.
VT100: ASCII char set.
VT100+: Extends VT100
to support color, function
keys, etc. VT-UTF8: Uses
UTF8 encoding to map
Unicode chars onto 1 or
more bytes.
Select Screen
→←:
Select Item
↑↓:
Enter: Select
+/ - : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
Legacy USB Support
XHCI Hand-off
Enable or disable XHCI Hand-off.
USB Mass Storage Driver Support
Enable or disable USB Mass Storage Driver Support.
41
Enabled Enable Legacy USB support.
Disabled Keep USB devices available only for EFI applications.
Auto Disable Legacy support if no USB devices are connected.
www.dfi.com