Table of Contents
Advertisement
X System Memory
The system board supports the following memory interface.
Single Channel (SC)
Data will be accessed in chunks of 64 bits from the memory channels. DIMMs are on the same
channel. DIMMs in a channel can be identical or completely different. However, we highly rec-
ommend using identical DIMMs. Not all slots need to be populated.
Features
•
Six 288-pin RDIMM up to 192GB
•
Single Channel DDR4 up to 2933 MHz
User's Manual | PR610-C621
DDR4_3
DDR4_2
DDR4_1
DDR4_4
DDR4_5
DDR4_6
System Memory
X
Installing the DIMM Module
Before installing the memory module, please make sure that the following safety cautions are
well-attended.
1. Make sure the PC and all other peripheral devices connected to it has been powered
down.
2. Disconnect all power cords and cables.
3. Locate the DIMM socket on the system board
4. Make sure the notch on memory card is aligned to the key on the socket.
Eject Tab
Chapter 2
HARDWARE INSTALLATION
DDR4 DIMM
Notch
Socket Top View
Key
Eject Tab
Socket Side View
Step 1
Step 2
10
Advertisement
Table of Contents
