Serial Port Console Redirection ► Console Redirection Settings; Usb Configuration - DFI CMS171 User Manual

Advanced
X
Serial Port Console Redirection
► Console Redirection Settings
Terminal Type
Select terminal type: VT100, VT100+, VT-UTF8 or ANSI.
Bits per second
Select serial port transmission speed: 9600, 19200, 38400, 57600 or 115200.
Data Bits
Select data bits: 7 bits or 8 bits.
Parity
Select parity bits: None, Even, Odd, Mark or Space.
Stop Bits
Select stop bits: 1 bit or 2 bits.
Flow Control
Select flow control type: None or Hardware RTS/CTS. Flow Control is for RS485 mode and is
only supported by Serial Port 1 (COM1).
User's Manual | CMS171/CMS173
Advanced
X

USB Configuration

Legacy USB Support
• Enabled Enable Legacy USB support.
• Disabled Keep USB devices available only for EFI applications.
• Auto Disable Legacy support if no USB devices are connected.
XHCI Hand-off
Enable or disable XHCI Hand-off.
USB Mass Storage Driver Support
Enable or disable USB Mass Storage Driver Support.
Chapter 3
BIOS SETTINGS
29