X Internal I/O Connectors
SATA (Serial ATA)
The Serial ATA (SATA) connectors are used to connect the Serial ATA device. SATA 3.0 is sup-
ported by the five SATA ports and provides data rate up to 6Gb/s. Connect one end of the Se-
rial ATA cable to a SATA connector and the other end to your Serial ATA device.
BIOS Setting
Configure the Serial ATA drives in the "Advanced > SATA Configuration" submenu of the BIOS.
Refer to chapter 3 for more information.
Features
•
6 Serial ATA 3.0 ports with data transfer rate up to 6Gb/s
•
Integrated Advanced Host Controller Interface (AHCI) controller
•
Support RAID 0, RAID 1, RAID 5, RAID 10
User's Manual | PR610-C621
SATA Pin Assignment
7
GND
RX+
RX-
GND
TX-
TX+
GND
1
SATA 5/4/3/2/1/0 from left to right
Internal I/O Connectors
X
Front Audio
1
2
9
10
Front Audio
The Front Audio internal connector allows you to connect to the second line-out and mic-in
jacks that are at the front panel of your system.
Front Audio Pin Assignment
Pin Assignment
1
Mic-L
3
Mic-R
5
Line-Out-R
7
GND
9
Line-Out-L
Chapter 2
HARDWARE INSTALLATION
Pin Assignment
2
GND
4
N.C.
6
Mic-JD (sense)
8
KEY
10
Line-JD (sense)
18