Usb Configuration - DFI CS632 User Manual

Advanced Serial Port Console Redirection
X X
► Console Redirection Settings
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Advanced
COM1
Console Redirection Settings
Terminal Type [VT100+]
Bits per second [115200]
Data Bits [8]
Parity [None]
Stop Bits [1]
Flow Control [None]
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
Configure the serial settings of the current COM port.
Terminal Type
Select terminal type: VT100, VT100+, VT-UTF8 or ANSI.
Bits per second
Select serial port transmission speed: 9600, 19200, 38400, 57600 or 115200.
Data Bits
Select data bits: 7 bits or 8 bits.
Parity
Select parity bits: None, Even, Odd, Mark or Space.
Stop Bits
Select stop bits: 1 bit or 2 bits.
Flow Control
Select flow control type: None or Hardware RTS/CTS. Flow Control is for RS485 mode and is
only supported by Serial Port 1 (COM1).
User's Manual | CS632
Advanced
X

USB Configuration

Enable CPU SmartFan
USB Configuration
Legacy USB Support
XHCI Hand-off
USB Mass Storage Driver Support
→←: Select Screen
↑↓: Select Item
Enter: Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
Legacy USB Support
Enabled
Disabled
Auto
XHCI Hand-off
Enable or disable XHCI Hand-off.
USB Mass Storage Driver Support
Enable or disable USB Mass Storage Driver Support.
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Advanced
[Enabled]
[Enabled]
[Enabled]
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
Enable Legacy USB support.
Keep USB devices available only for EFI applications.
Disable Legacy support if no USB devices are connected.
Chapter 3
BIOS SETTINGS
Enables Legacy USB sup-
port. AUTO option disables
legacy support if no USB
d e v i c e s a r e c o n n e c t e d .
DISABLE option will keep
USB devices available only
for EFI applications.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
43