Table of Contents
Advertisement
Boot
X
PXE Boot capability
This field is only available when "Boot Type" is set to "UEFI Boot Type" or "Dual Boot Type", and
when "Network Stack" is enabled.
Disabled Suppoort Network Stack
UEFI
IPv4/IPv6
Legacy Legacy PXE OPROM only
PXE Boot to LAN
Enable or disable Boot into the Pre-boot Execution Environment (PXE) stored in the LAN. This
field is only available when "Boot Type" is set to "Legacy Boot Type" or "Dual Boot Type", and
when "Network Stack" is enabled.
USB Boot
Enable or disable booting to USB boot devices.
Quiet Boot
Enable or disable booting in text mode.
X EFI/Legacy
Configure boot priorities in this submenu. Re-arrange the order by pressing -/+ or F5/F6 to
move the highlighted item down/up the priority list. This field is only available when the system
detects any boot device.
Normal Boot Menu
Select a priority arranging method.
Normal
Boot priority is arranged according to the type of the storage devices, and the
configured order.
Advance
Boot priority is arranged according to the configured order regardless of the
type of the storage devices.
User's Manual | PR610-C621
InsydeH2O Setup Utility
Boot
EFI/Legacy
Normal Boot Menu
<Normal>
►Boot Type Order
►Hard Disk Drive
►CD/DVD-ROM Drive
►USB
►PXE
►Others
F1
Help
↑ /↓
Select Item
Esc
Exit
←/→
Select Item
►Boot Type Order
Arrange the priority of types of the storage devices.
XHard Disk Drive/ XCD/DVD-ROM Drive / XUSB / XPXE / XOthers
Arrange the priority of the storage devices in each category. The submenu will not be displayed
when there is no available storage device of the type.
Note:
When a desired LAN port for PXE boot is not listed as a boot device, please con-
firm that the "PXE Boot to LAN", "PXE boot capability", "Network Stack" and the
LAN controller of the said LAN (go to "Advanced" > "PCI Express Configuration")
are enabled. Please press F10 to save the settings and re-start the system board
for the settings to take effect.
Chapter 3
BIOS SETTINGS
Rev. 5.0
Select Normal Boot Option
Priority or Advance Boot
Option Priority
F5/F6
Change Values
F9
Setup Defaults
Enter
Select
SubMenu
F10
Save and Exit
X
39
Advertisement
Table of Contents
