Simons Voss Technologies VdS Block lock Manual page 22

VdS Block lock
4.3.2.3 Activation slave
(Manual)
No separate antenna is used for this installation
antenna to the master (optional) [
maximise the range (see also
With this simple installation method, activation is possible both from inside
and outside. According to VdS, activation must only be possible from the
outside (see VdS requirements [
separate antenna is not VdS-compliant.
Mount the activation slave above the door frame. Keep a distance of at
least one and a half metres from other SimonsVoss components (see
drawing) to prevent mutual interference.
Align the activation unit so that the fastening screws are in a horizontal line
(see drawing) in order to rule out interference during normal door
operation.
≥150 cm
Locking cylinder
Deactivation
unit
No separate antenna is used for this installation (see
external antenna at the slave (optional) [
B2 to maximise the range (see also
With this simple installation method, activation is possible both from inside
and outside. According to VdS, activation must only be possible from the
outside (see VdS requirements [
separate antenna is not VdS-compliant.
Connection of the external
36] ). Therefore, plug jumper B2 to
}
Setting the jumpers [
}
23] ). Therefore this installation without
}
Activation unit
42]
). Therefore, plug jumper
}
Setting the jumpers [
23] ). Therefore this installation without
}
4. Initial operation
22 / 52
32] ).
Connection of the
38] ).
}