Description Of Functions - Simons Voss Technologies VdS Block lock Manual

VdS Block lock

3 Description of functions

Activation units
Deactivation units are used to switch the alarm
system.
You require at least one activation unit for ex-
ternal activation and deactivation. If you want
to activate or deactivate from several loca-
tions, you need one activation unit for each loc-
ation.
Transponders that are authorised on the activ-
ation unit in the locking plan can activation and
deactivation.
There are activation masters and activation
slaves. The activation master can activate the
alarm system with a potential-free contact.
The activation slaves send a request for activa-
tion to the activation master, which then activ-
ates the alarm system.
The activation slaves can activate the alarm
system internally if they are connected separ-
ately to the internal activation connection of
the burglar alarm panel.
(Manual)
In alarm-secured objects, a false alarm is triggered if the alarm system has
already been activated externally and someone inadvertently enters the
secured area. An external activation takes place, for example, through
burglar alarm systems (EMA).
The VdS block lock function 3066 (VdS number G 101 160) blocks the
locks during activation and thus prevents false alarms. No extensive work
on the door or door frame is required.
The block lock function always consists of at least two components:
Deactivation units
Deactivation units
Deactivation units prevent the doors from be-
ing opened accidentally.
You need one deactivation unit for each door
to the secured area.
The deactivation units are installed next to the
doors to the secured area. When the alarm
system is activated, the doors cannot be
opened inadvertently even with an authorised
transponder.
Activation master
3. Description of functions
10 / 52
Burglar alarm
system