Notes About Process Safety Of The Device - Wittmann Tempro basic C 90 Translation Of Original Operating Manual

1.4 Notes about process safety of the device

This device is designed exclusively for the heating of water as described in
chapter 13.2 "Heat transfer fluid".
CAUTION The permissible storage temperature of the device is +5°C – +40°C
(+41°F – 104°F)
When the device is set into operation for the first time, all electrical
connections are to be checked.
Check the rotational direction of the pump.
CAUTION Keep a record of maintenance and repair work.
CAUTION Use only Wittmann original replacement parts.
To shut down the device in the event or an emergency (EMERGENCY-
STOP), operate the main switch or disconnect the mains plug from the socket (if
device is equipped with a socket).
In the event of a power failure, do not manipulate or disconnect the
tempering medium hoses, as the entire tempering system is pressurised. RISK OF
INJURY FROM BURNS!
In the event of a power failure of EMERGENCY-STOP, do not manipulate or
disconnect the hoses filled with tempering medium! The entire tempering system is
pressurised and the device is automatically restarted as soon as the power
returns. An EMERGENCY-STOP of the machine does not automatically result in
an EMERGENCY-STOP of the tempering device! RISK OF INJURY FROM
BURNS!
Do not operate the device when the switch cabinet or the terminal box door
is open.
Never operate the heater, if its protective covers or side panels are removed.
RISK OF INJURY FROM BURNS!
Tempro basic C 90 & Tempro primus C 90
BASIC & PRIMUS C90 V 3.0 english / 10.04.2012
Page 9