Requirement On The Installation Location - Wittmann Tempro basic C 90 Translation Of Original Operating Manual

3.2 Requirement on the Installation Location

Location of installation ...................... Closed room
Air humidity ....................................... 15% - 85%
Height above sea level ...................... max. 1000 m
Horizontal alignment ......................... max. deviation +/-3° (uneven floor)
Floor ................................................. Non-slip surface, dry, no trip hazards
Ambient temperature ......................... +5°C to +40°C
Load-bearing capacity / device.......... Observe weight and dimensions
MODEL
Tempro basic C 90
Tempro primus C 90
Ensure that all parts of the machine are easily accessible for maintenance
and repair. Keep the workplace clean and uncluttered!
Take into account that the device releases heat and humid air during
operation.
Ensure that there is sufficient ventilation at the location of installation.
If the units are to be installed on platforms, you must provide additional
safety devices (e.g. strips) to prevent the heaters from rolling off (alternatively,
order rollers with locking mechanism available from Wittmann).
The device must not be operated in explosive atmospheres.
Tempro basic C 90 & Tempro primus C 90
Weight
DESIGN [kg]
Standard 31
Standard 31
Width Height
[mm] [mm]
235 660
235 660
BASIC & PRIMUS C90 V 3.0 english / 10.04.2012
Page 13
Depth
[mm]
590
590