Wittmann Tempro basic C 90 Translation Of Original Operating Manual page 8

With the help of the operating manual, prepare a precise work instruction for
the work sequence with this device. Nominate a machinist responsible for the
device. The operators of the device must be at least 16 years old.
Regularly inspect all lines, hoses and screw couplings for leaks, damage
and firm seating. Have defects that occur eliminated immediately.
Observe and take note of the warning signs.
In the event of malfunctions, immediately shut down the machine using the
main switch.
If the device has been shut down for safety reasons or while mechanical
work on the device is being completed, you must secure it against unauthorised
switching on. To do this, disconnect the power supply by pulling the mains plug.
Before carrying out any work on the device, disconnect it from the power
supply.
Do not undertake any modifications of any kind on the device without the
written approval of the manufacturer.
Before beginning maintenance work, nominate a supervisor and notify the
operating personnel responsible.
This device must not be operated if certain parts are not mounted or if the
protective covers or side panels have been removed. RISK OF INJURY FROM
BURNS!
Observe the safety instructions / operating manual of the connected
devices.
Keep this operating manual safe, so that it is available at any time at the
place where the device is operated.
Tempro basic C 90 & Tempro primus C 90
BASIC & PRIMUS C90 V 3.0 english / 10.04.2012
Page 8