Tempro basic C 90 & Tempro primus C 90
Page 10
Certain accessible parts at the connecting points of the device are very hot
(temperature of over 70°C)! RISK OF INJURY FROM BURNS!
In the event of a control system failure that makes it impossible to control the
device, immediately contact the manufacturer. Do not take any action unless
instructed by the manufacturer! RISK OF INJURY FROM BURNS!
2 Completeness of the Delivery, Warranty
Wittmann devices are packed with great care, in order to protect them during
transport. For assembly, all packaging is to be removed.
CAUTION Remove the packaging and the protective foil of the devices with great
care. The use of sharp objects can cause damage to the painted surfaces and the
devices.
Verify the completeness of the delivery.
2.1 Transport Damage
The commissioned transport organizations must ensure that the devices are
delivered in an undamaged condition.
Inspect the device for visible transport damage immediately after it arrives.
Report any visible transport damage to the commissioned transport organization
immediately.
In the event of any transport damage, discuss a solution to rectify the damage
directly with the transport organization.
2.2 Warranty
For delivered products, we undertake the warranty for defects that result due to a
fault in construction, the material or the workmanship for a period of 12 months
after acceptance of the goods by the customer.
The defect notification must take place immediately and in writing.
We are not liable for damage occurring as a consequence of natural wear and
tear, excessive loading, faulty handling, unsuitable operating materials, defective
maintenance and the like.
For further details, refer to the Sales and Delivery Conditions.
In the event of transport damage, do not return the device, but instead
notify our nearest customer service center without delay.
You will find this in chapter Customer Service Centers
BASIC & PRIMUS C90 V 3.0 english / 10.04.2012
Need help?
Do you have a question about the Tempro basic C 90 and is the answer not in the manual?