Maintenance - Wittmann Tempro basic C 90 Translation Of Original Operating Manual

1xMODE
1xMODE Adr
1xMODE
1xMODE - - -
To exit the menu, simultaneously press the buttons

8 Maintenance

Please observe the required maintenance intervals, because this is the only way
of guaranteeing the proper functioning of the stabilizer and of granting the full
scope of warranties according to our terms of warranty.
Maintenance may be carried out by qualified personnel only.
By take over the temperature stabilizer of the operating company, the user
also takes over the responsibility of maintenance and inspection of the safety
devices.
We specifically point out that the safety instructions marked CAUTION should be
inspected as required in order to maintain the proper functioning of these
stabilizers.
CAUTION Every 2000 operating hours the maintenance alarm will be activated
and indicated by the flashing operating hours lamp. Acknowledge maintenance
alarm (in mode "Display of Operating Hours") by simultaneously pressing both
cursor keys.
Tempro basic C 90 & Tempro primus C 90
Key Display Function
UP / 1.2 – 1 200 / no parity
Down
1.2 E 1 200 / even parity
1.2 o 1 200 / odd parity
4.8 – 4 800 / no parity
4.8 E 4 800 / even parity
4.8 o 4 800 / odd parity
9.6 – 9 600 / no parity
9.6 E 9 600 / even parity
9.6 o 9 600 / odd parity
19. – 19 200 / no parity
19. E 19 200 / even parity
19. o 19 200 / odd parity
Address
Key Display Function
UP / 0 - 90 adjusted address
Down
End
and !
BASIC & PRIMUS C90 V 3.0 english / 10.04.2012
Page 35