Operation Mode; Pressurized Stabilizing; Suction Temperature Control; Evacuating - Wittmann Tempro basic C 90 Translation Of Original Operating Manual

6.4 Operation mode

Tempro basic C 90:
Two temperature-controlled operating modes (pressure and suction temperature
control) and the empty suction function are available.
Tempro primus C 90:
Only the pressure tempering mode and the emptying by suction function are
available.

6.4.1 Pressurized stabilizing:

This is the standard operation mode in which the stabilizing medium is pumped
through hoses and tool channels.
Main switch position 1

6.4.2 Suction temperature control:

Here the temperature control medium is sucked through hoses and tool channels
(leak stop operation )
Main switch position 2
Tempro primus C 90:
This tempering mode is NOT available for the PRIMUS C90.

6.4.3 Evacuating:

In this operation mode, the stabilizing medium is sucked.
Tempro primus C 90:
Evacuating optional
Here, the tempering medium is sucked out of the mould.
Main switch position 2
Tempro basic C 90 & Tempro primus C 90
BASIC & PRIMUS C90 V 3.0 english / 10.04.2012
Page 21