Short Overview Of Operation And Settings; Input And Displaymode; Status Display - Wittmann Tempro basic C 90 Translation Of Original Operating Manual

7.2 Short overview of operation and settings

7.2.1 Input and Displaymode

operating hour counter
number +

7.2.2 Status display

LED illuminate
HEATING is active
COOLING is active
PUMP is running
UNIT is filling
TEMPERATURE at Fahrenheit
LED °F dark:
Tempro basic C 90 & Tempro primus C 90
Shift input and Display - mode with key
SET 1 = Set point value change with keys
or
SET 2 = Set point value change with keys
or
TOL = Tolerance +/- change with keys
or
1 h = 1 unity
number x 1000 = number of operating hours
LED flashing
safety temperature limiter released
motor protection relay released
Leakage (filling time exceeded)
all temperature at °C
BASIC & PRIMUS C90 V 3.0 english / 10.04.2012
Page 24